Control4 installer
Control4 installer on Staten Island
New construction, big renovations and family homes across Staten Island, a short trip from both our Brooklyn and New Jersey teams.
5.0 on Google · 60+ reviews
Authorized DealerStaten Island has a lot of new construction and large renovations, which are the best time to plan Control4: lighting, audio, TVs, cameras and Wi-Fi wired in before the walls close. Existing homes can add a lot wirelessly.
Pools, patios and finished basements are common here, so outdoor audio and theaters come up often.
Staten Island homes
Common projects.
- Pre-wire for new construction
- Basement theaters and bars
- Pool and patio audio and TVs
- Cameras, gates and smart locks
- Lighting scenes on main floors
- Whole-home Wi-Fi
Local guide
From Todt Hill to the South Shore: Control4 by neighborhood
Neighborhoods on Staten Island differ more than people expect, and that changes the right setup. On the North Shore, around St. George and the nearby hills, older Victorians and frame houses have plaster walls, turning staircases and few clean wire paths, so wireless keypads and careful access point placement do much of the work. On and around Todt Hill and Emerson Hill, larger homes on sloped lots often have several levels, long driveways and views that call for motorized shades and outdoor lighting on schedules.
The South Shore, from Great Kills to Tottenville, includes many homes near the water and in flood-prone areas, some of them raised or rebuilt. In those homes the equipment rack belongs on a living level rather than the ground floor or basement, outdoor speakers and cameras should be rated for coastal conditions, and a battery backup keeps the network up through brief storm outages. Salt air corrodes cheap exterior fixtures quickly, and water sensors on the lowest level are a simple, worthwhile addition.
Across the island there are many attached and semi-attached homes and two-family houses, often with shared driveways. Camera placement needs some care so you cover your own entry, garage and driveway without recording a neighbor's door or windows. In two-family homes, keeping the owner's network and controls separate from the tenant's unit makes the system easier to manage and respects everyone's privacy. A video doorbell that rings on phones and the TV helps when someone is out in the yard or down in the basement.
Commuters taking the ferry or driving over the bridge get home at different hours, so an arrival scene that lights the stoop and driveway and adjusts the heat or air is useful for Staten Island families. Backyard pools are common too, and a contact sensor on the pool gate with an alert when it opens, plus a camera covering the pool area, adds a useful layer of safety for households with young children. Pool lights and a patio speaker zone can join the same evening scene.
FAQ
Control4 installer on Staten Island: common questions
Can you pre-wire my new house?
Yes. See Control4 pre-wire.
Are you an authorized Control4 dealer for Staten Island?
Yes. 1800Install is an authorized Control4 dealer, and we design, install, program and support systems in Staten Island.
Can you take over a system another dealer installed?
Yes. We can usually take over, document and upgrade an existing system. See new Control4 dealer.
How do I place cameras on a semi-attached house without filming my neighbor?
Aim cameras at your own entry, driveway and yard, and use privacy masking where a view would otherwise include a neighbor's door or windows.
Can I get an alert when my pool gate opens?
Yes. A contact sensor on the gate can send an alert, and a camera can show who opened it.
My home is near the water on the South Shore. Where should the equipment go?
On a living level above any flood-prone area, with surge protection and a battery backup.
Free quote. Often same-day appointments.